ON-SITESan Antonio · Bulverde · New Braunfels · Boerne · Schertz · Selma · Universal CityREMOTENationwide US & Into CanadaCERTIFIEDNASTF Registered · OEM ToolingHOTLINE(210) 439-7905ON-SITESan Antonio · Bulverde · New Braunfels · Boerne · Schertz · Selma · Universal CityREMOTENationwide US & Into CanadaCERTIFIEDNASTF Registered · OEM ToolingHOTLINE(210) 439-7905
▸ TRADE SERVICE

Remote J2534 programming
across the US & Canada.

Spot-On runs remote J2534 module programming for repair shops, body shops, transmission shops, and dealerships across the US and Canada. You stay in your bay with a J2534-compliant pass-thru device or compatible Autel scan tool; we connect from our shop and drive the programming session using OEM-authentic software — plus engineering-tier tools the dealer doesn't deploy. Most platforms scheduled within hours during business days.

▸ TWO DELIVERY METHODS

Pick what fits your shop's tooling.

Whichever your bay already has, we connect from our shop and complete the programming session live.

  • Autel Remote ExpertIf you have a compatible Autel MaxiSys with Remote Expert enabled, we connect directly to your tool from our shop. No additional hardware required on your end. Fastest path — setup in minutes.
  • J2534 pass-thruConnect your pass-thru device (Mongoose, DrewTech CarDAQ-Plus, Bosch MTC, GM MDI, etc.) to a Windows laptop in the bay. We connect remotely and run the OEM software from our end. Typical setup 5–10 minutes.
▸ YOUR SIDE

What you need in the bay.

  • Pass-thru device or compatible Autel toolPer the method above.
  • Windows laptopFor J2534 sessions. Not required for Autel Remote Expert.
  • Stable internetWired preferred. 25 Mbps+ recommended for OEM software downloads during the session.
  • Battery maintainer on the vehicle12.6V+ minimum. Programming load can pull voltage dangerously low.
  • Ignition state, fault codes, key fobsPer the platform's requirements. We confirm specifics when you call.
▸ OUR SIDE

OEM-authentic software, engineering-tier where it counts.

  • Manufacturer-licensed scan toolsODIS, FDRS, GDS2, TIS Techstream, Pathfinder, PIWIS, XENTRY, wiTECH, INSITE, and more.
  • Engineering-tier softwareODIS-E, INPA, ISTA/P, SFD authentication, component-protection unlocks where required.
  • NASTF VSP credentialsFor secure-gateway-protected procedures.
  • Same-day availabilityMost platforms scheduled within hours during business days.
▸ READY TO DISPATCH

Request this service.

Call with the OEM, module, and fault codes. Same-day available for most platforms during business hours.

Request Dispatch (210) 439-7905